research
 Patents
 Books
 Literature
 Articles
 Timeline
 Auction Archive

about
 About this site
 Wanted to buy

bulb gallery

Incandescent:
C
carbon
WD
drawn tungsten
WC
coiled tungsten
WM
mini tungsten
WS
pressed tung.
FG
figural bulbs
XL
christmas
XS
christmas sets
T
tantalum

Discharge:
NE
neon lamps
AR
argon lamps
XE
xenon lamps
MA
mercury
MC
fluorescent
MS
special mercury

Hardware:
F
fuses
FX
fixtures
PF
plugs & fittings
SA
sockets
SW
switches

tube gallery

 X-ray
 Geissler
 Crookes
 Radio
 Box art

museum pics

 Dr. Hugh Hicks
 
Fort Myers, FL.
 S.Slabyhoudek

links

 Related links
 Submit a link

 

Author Topic: Dead light Bulbs  (Read 14149 times)

Offline Christmas Lamp

  • Purple Bubble Light
  • Hero Member
  • ****
  • Posts: 267
Dead light Bulbs
« on: November 10, 2011, 10:42:53 am »
OK, Might be a bit of strange Question... What really happens to a Light Bulb when it Dies?
Thanks
 :-)
I love Any Bulbs be They the Light up kind or the kind that Grows!!!

Offline adam2

  • Hero Member
  • ****
  • Posts: 108
Re: Dead light Bulbs
« Reply #1 on: November 13, 2011, 09:24:10 am »
In the case of an incandescent lamp, the most likely cause of failure is breakage of the filament, caused usually by gradual evaporation of the filament material as the lamp is used.
Less common causes of failure are air ingress to the bulb causing oxidation of the filament, and breakage due to shock or vibration.
Failure of the electrical connection between the lamp cap and glass bulb can occur but is a very rare fault.

In the case of discharge lamps, the most common failure mode is the gradually burning away of the electrodes.
Air ingress and physical breakage being other causes.

In the case of flourescent lamps, the common failure mode is that the electrodes lose their emmisive properties and wont emit enough ellectrons. Sometimes the filaments at the ends go open circuit, in which case the lamp may work on some ballasts but not others.
Sometimes the mercury in the tube is all used up*, the lamps still lights then but gives a very dim lilac or purple light.

In the case of CFLs that have a built in ballast, then failure of this is another failure mode.

*The mercury is not actually consumed, but forms compounds with the glass tube or the other contents of the lamp, and is therefore not available as mercury vapour for correct operatiion.

Offline Christmas Lamp

  • Purple Bubble Light
  • Hero Member
  • ****
  • Posts: 267
Re: Dead light Bulbs
« Reply #2 on: November 14, 2011, 05:39:27 am »
Thank You For Explaining it adam2.... I had always thought it would be the filament to go but wasn't sure....
I love Any Bulbs be They the Light up kind or the kind that Grows!!!