research
 Patents
 Books
 Literature
 Articles
 Timeline
 Auction Archive

about
 About this site
 Wanted to buy

bulb gallery

Incandescent:
C
carbon
WD
drawn tungsten
WC
coiled tungsten
WM
mini tungsten
WS
pressed tung.
FG
figural bulbs
XL
christmas
XS
christmas sets
T
tantalum

Discharge:
NE
neon lamps
AR
argon lamps
XE
xenon lamps
MA
mercury
MC
fluorescent
MS
special mercury

Hardware:
F
fuses
FX
fixtures
PF
plugs & fittings
SA
sockets
SW
switches

tube gallery

 X-ray
 Geissler
 Crookes
 Radio
 Box art

museum pics

 Dr. Hugh Hicks
 
Fort Myers, FL.
 S.Slabyhoudek

links

 Related links
 Submit a link

 

Author Topic: Homemade christmas bulb tester  (Read 14955 times)

Offline Hemingray

  • Hero Member
  • ****
  • Posts: 136
  • Lightbulb Junkie
Homemade christmas bulb tester
« on: September 10, 2006, 12:46:42 am »
Just finished this tonight, used the cabinet of an old defunct radio for this project. The power supply consists of two transformers connected together, giving me full isolation from the main AC line. The first transformer has multiple taps (pilfered from a nonworking VCR) and connects to the C6 tester and second transformer. The second transformer steps the LV from the 1st xfmr back upto 120v, which connects to a bridge rectifier, then onto the C7 and C9 testers. Voltage control to each bulb is handled by NPN Power transistors and a 100k pot (50k on the C6). This works well for slowly bringing up even the oldest lamps. the control end doesn't exactly look pleasant (used whatever was near me at the time). The photos below show the assembly (No shots of the electronics as of yet). The second photo shows three bulbs (C6/7/9) being operated at low power levels on the tester At this level you can see the fine details of the blue MAZDA C9 lamp on the far right.