research
 Patents
 Books
 Literature
 Articles
 Timeline
 Auction Archive

about
 About this site
 Wanted to buy

bulb gallery

Incandescent:
C
carbon
WD
drawn tungsten
WC
coiled tungsten
WM
mini tungsten
WS
pressed tung.
FG
figural bulbs
XL
christmas
XS
christmas sets
T
tantalum

Discharge:
NE
neon lamps
AR
argon lamps
XE
xenon lamps
MA
mercury
MC
fluorescent
MS
special mercury

Hardware:
F
fuses
FX
fixtures
PF
plugs & fittings
SA
sockets
SW
switches

tube gallery

 X-ray
 Geissler
 Crookes
 Radio
 Box art

museum pics

 Dr. Hugh Hicks
 
Fort Myers, FL.
 S.Slabyhoudek

links

 Related links
 Submit a link

 

Author Topic: Questio about a resistance inside the caps of a neon glow bulb  (Read 15397 times)

Offline M Martini

  • New Member!
  • *
  • Posts: 2
Questio about a resistance inside the caps of a neon glow bulb
« on: January 16, 2007, 12:46:15 pm »
Hi Everybody,
I am new, I live in Portugal so excuse me for my english.I just begin a collection of figural bulbs and I bought a neon figural glow bulb on Ebay. The filament is of a double lily. 120 v. 3 to 5 watt.
When I received my bulb, the caps was unstick, the bulb does not light because? inside the caps, I saw a resistance sealed to one of the two wires fixed to the caps. But the resistance is broken, this is why the bulb does not light I think. Everything is ok inside the glass bulb except the resistance inside the caps.
Can you tell me the properties/characteristics of this resistance for I want to try to put a new one. Thanks a lot if somebody can help me and happy new year for everybody.
Miss Martini.

Offline Tim

  • Administrator
  • Hero Member
  • *****
  • Posts: 831
    • http://www.bulbcollector.com
Re: Questio about a resistance inside the caps of a neon glow bulb
« Reply #1 on: January 19, 2007, 07:16:18 pm »
Hi and welcome to the forum.  This particular glow bulb is a common one and easily had on eBay, usually for low prices since it?s a modern bulb.  Personally, I wouldn?t consider this bulb valuable enough to warrant the time needed to change out the bad resistor in the base.  IMHO, I think it?s more trouble than what it?s worth for this bulb.  Perhaps someone else can comment on a procedure used to the remove the base.  I know it?s been discussed before.  Searching around the forum may turn up a thread or two dealing with this.

Offline M Martini

  • New Member!
  • *
  • Posts: 2
Re: Questio about a resistance inside the caps of a neon glow bulb
« Reply #2 on: January 23, 2007, 01:49:29 pm »
Thank you for your response  and advice Tim.
M Martini.