research
 Patents
 Books
 Literature
 Articles
 Timeline
 Auction Archive

about
 About this site
 Wanted to buy

bulb gallery

Incandescent:
C
carbon
WD
drawn tungsten
WC
coiled tungsten
WM
mini tungsten
WS
pressed tung.
FG
figural bulbs
XL
christmas
XS
christmas sets
T
tantalum

Discharge:
NE
neon lamps
AR
argon lamps
XE
xenon lamps
MA
mercury
MC
fluorescent
MS
special mercury

Hardware:
F
fuses
FX
fixtures
PF
plugs & fittings
SA
sockets
SW
switches

tube gallery

 X-ray
 Geissler
 Crookes
 Radio
 Box art

museum pics

 Dr. Hugh Hicks
 
Fort Myers, FL.
 S.Slabyhoudek

links

 Related links
 Submit a link

 

Author Topic: Ain't exactly a bulb,but....  (Read 11777 times)

Offline Scott

  • Sr. Member
  • ***
  • Posts: 84
Ain't exactly a bulb,but....
« on: October 15, 2000, 09:30:00 pm »
I have several heating elements called Glocoils-a ceramic cone with a Edison base at the "peak" of the cone,and a heating element wrapped around the cone. It's listed as a 220volt coil. I suspect it's for those old sattelite-dish shaped space heaters of the '30's and '40's,but I'm not sure. I have a few,some made by Eagle Electric, the other by a company called Rodale. I fished them out of the trash a few years ago. They're new,and still in the box.I've fired up one(on 110) and it got just a bit too hot to touch,but not red hot. Any ideas on these things?

Offline Chris Kocsis

  • Sr. Member
  • ***
  • Posts: 84
Ain't exactly a bulb,but....
« Reply #1 on: October 17, 2000, 06:03:00 pm »
They are indeed heater coils for the dish-shaped heaters.  They don't seem to have much value except if you want to fit up your heater.

The only interesting fact I have about these is that the General Electric heater elements have a left-hand thread.  That makes it harder to find a replacement.  I went through the few coils I have and sure enough, one is left handed.