research
 Patents
 Books
 Literature
 Articles
 Timeline
 Auction Archive

about
 About this site
 Wanted to buy

bulb gallery

Incandescent:
C
carbon
WD
drawn tungsten
WC
coiled tungsten
WM
mini tungsten
WS
pressed tung.
FG
figural bulbs
XL
christmas
XS
christmas sets
T
tantalum

Discharge:
NE
neon lamps
AR
argon lamps
XE
xenon lamps
MA
mercury
MC
fluorescent
MS
special mercury

Hardware:
F
fuses
FX
fixtures
PF
plugs & fittings
SA
sockets
SW
switches

tube gallery

 X-ray
 Geissler
 Crookes
 Radio
 Box art

museum pics

 Dr. Hugh Hicks
 
Fort Myers, FL.
 S.Slabyhoudek

links

 Related links
 Submit a link

 

Author Topic: New member  (Read 14544 times)

Offline JoeinRI

  • New Member!
  • *
  • Posts: 2
New member
« on: April 23, 2009, 11:58:41 am »
Hello everyone,
I'm a new collector and new to this site.  My name is Joe and reside in Rhode Island. I've been an avid collector/restorer of antique radios for a  couple of years now. My collection of radios has grown and I'm running out of room!  I've recently started to collect antique bulbs (I believe that they compliment the antique radio collection).
A recent purchase I made was that of a variac. i'd like to set a few bulbs in different locations on one wall...in between my radios. One of the problems is....not sure what I've got here in regards to bulbs. Should these bulbs be burned upright or hanging down? Does an evacuation tip on top of bulb mean that it pre-dates a certain year?
I'm careful not to apply too much voltage to the bulbs I have, although i belive them all to be 110V bulbs.
I did recently pick up an Edison/Mazda pricing booklet dated June 1, 1928 - clearly showing (at least the shapes of some of my bulbs)...and most are rated at 110V
I have one that appears to be a Street Light bulb from around 1928 with mogul base.  Is it possible to get adapaters for a mogul base bulb to fit in a medium base socket. I've seen the other way, but not medium to mogul.
From my readings on different sites....it seems to be very difficult to date some of these bulbs.

Thanks in advance for any help you can provide.
Joe

Offline adam2

  • Hero Member
  • ****
  • Posts: 108
Re: New member
« Reply #1 on: April 24, 2009, 11:19:57 am »
I doubt that you will find a mass produced adapter to use a mogul hase bulb in a standard socket, one of the reasons for the different size bases was to stop people useing lamps of excessive power in domestic and similar fixtures.

Regarding your mogul base bulb, possibly for street lighting, does it have a voltage marked on it ? if not be very cautious.
In years gone by, street lighting used lamps rated by candle power and amps, not by voltage. Large numbers of such lamps were burnt in series from a relativly high voltage supply such as 480 volts. Common current ratings were 6.6 amps and 15 amps. The voltage accorss each lamp was very low, from about 10 volts up to about 50 volts dependant on current and candle power.
Such a lamp would be instantly destroyed if connected to line voltage.
If you suspect that a lamp is for series burning, try connecting it to a 6 volt lead acid battery (alkaline cells cant supply enough current for most types)

Lamps for series burning are still made today, including modern halogen types. The main application is airport runway lighting.

Offline JoeinRI

  • New Member!
  • *
  • Posts: 2
Re: New member
« Reply #2 on: April 24, 2009, 12:00:31 pm »
Thanks Adam! I'll keep that in mind when considering trying to power it up.  I do have the variac - 7A...capable of supplying low voltage. Would the bulb be drawing too much current trying it out that way? Thanks again for your advice to a novice newcomer!
Joe

Offline adam2

  • Hero Member
  • ****
  • Posts: 108
Re: New member
« Reply #3 on: April 25, 2009, 08:15:37 am »
A bulb that draws more than 7 amps should not be continualy powered from a 7 amp variac since the unit would be overloaded. Note that  it  is the variac not the bulb that would suffer.
A variac can easily supply twice the rated current for a brief test, therefore if your bulb is a series type rated at 6.6 amps it would be fine continually, and if rated at 15 amps it would be OK only for a brief test.

Or of course the bulb may be a regular type not a series one.