research
 Patents
 Books
 Literature
 Articles
 Timeline
 Auction Archive

about
 About this site
 Wanted to buy

bulb gallery

Incandescent:
C
carbon
WD
drawn tungsten
WC
coiled tungsten
WM
mini tungsten
WS
pressed tung.
FG
figural bulbs
XL
christmas
XS
christmas sets
T
tantalum

Discharge:
NE
neon lamps
AR
argon lamps
XE
xenon lamps
MA
mercury
MC
fluorescent
MS
special mercury

Hardware:
F
fuses
FX
fixtures
PF
plugs & fittings
SA
sockets
SW
switches

tube gallery

 X-ray
 Geissler
 Crookes
 Radio
 Box art

museum pics

 Dr. Hugh Hicks
 
Fort Myers, FL.
 S.Slabyhoudek

links

 Related links
 Submit a link

 

Author Topic: Phosphors for Discharge lamps  (Read 18298 times)

Offline Anders Hoveland

  • Jr. Member
  • **
  • Posts: 21
Phosphors for Discharge lamps
« on: May 18, 2015, 05:03:45 pm »
Ceramic Metal Halide (CMH) is basically a relatively new type of Metal Halide lamp that operates under high pressure.
Unlike the old Metal Halide lamps, CMH can offer excellent CRI and light quality, I am talking comparable to or even exceeding high CRI LED. The light quality feels very natural, and if one looks at a spectral graph of the light output, it is indeed "full-spectrum".

So I was wondering, could the excellent light quality from CMH be improved by utilizing phosphors? A sort of "hybrid" approach?
CMH bulbs consist of an inner capsule of sintered alumina, that contains the arc, covered by an outer coating of protective glass. Since the inner capsule is transparent to short wave UV, the inside of the outer glass layer could potentially be coated with a layer of phosphor.

I tried to do some research into this and discovered that many old mercury vapor lamps utilized a phosphor coating:
http://www.lamptech.co.uk/Spec%20Sheets/Philips%20HPLC80.htm

What many of you may not have considered though is that even regular "fluorescent" lamps are really a type of discharge lamp too. If you want to think about it this way, fluorescent tubes are a sort of "hybrid" lighting technology. The 436nm and 405nm blue-violet mercury lines comprise a substantial part of the light spectrum from a typical tri-color fluorescent tube. The only real difference from those mercury lamps is that it is a low pressure glow discharge.

I even found a Metal Halide bulb that uses phosphors to achieve better light quality:
Philips MasterColor? 100 Watt phosphor coated ceramic metal halide lamp with medium base, 4000K 93CRI
http://www.bulbs.com/product/MHC100-C-U-M-4K


Ceramic Metal Halide can achieve 96CRI at 4000K, but at lower color temperatures the CRI is not as high, because these lamps basically add sodium into the discharge tube, creating a yellow-orange line at 589nm.

But I was thinking if phosphors, the light spectrum could be improved. The spectrum of CMH contains a higher ratio of royal blue/violet wavelengths than natural daylight, and as a consequence the cool white lamps tend to be just a little magenta-tinted. But if that violet could be down-converted into cyan, it would make the light quality all the more natural. Phosphors would especially improve the spectrum of warmer color temperature CMH lamps, red could be added instead of yellow-orange.
« Last Edit: May 18, 2015, 05:10:43 pm by Anders Hoveland »