research
 Patents
 Books
 Literature
 Articles
 Timeline
 Auction Archive

about
 About this site
 Wanted to buy

bulb gallery

Incandescent:
C
carbon
WD
drawn tungsten
WC
coiled tungsten
WM
mini tungsten
WS
pressed tung.
FG
figural bulbs
XL
christmas
XS
christmas sets
T
tantalum

Discharge:
NE
neon lamps
AR
argon lamps
XE
xenon lamps
MA
mercury
MC
fluorescent
MS
special mercury

Hardware:
F
fuses
FX
fixtures
PF
plugs & fittings
SA
sockets
SW
switches

tube gallery

 X-ray
 Geissler
 Crookes
 Radio
 Box art

museum pics

 Dr. Hugh Hicks
 
Fort Myers, FL.
 S.Slabyhoudek

links

 Related links
 Submit a link

 

Author Topic: Antique Digital Bulbs: Need Information  (Read 14925 times)

Offline danrufus

  • New Member!
  • *
  • Posts: 1
Antique Digital Bulbs: Need Information
« on: December 23, 2007, 09:29:49 pm »
I would like to find some antique bulbs approximately one inch high that can display numbers 0 to 9 to recreate a clock i saw in a gallery.

does anyone have any info?

thanks.

Offline Chris W. Millinship

  • Hero Member
  • ****
  • Posts: 384
Re: Antique Digital Bulbs: Need Information
« Reply #1 on: December 24, 2007, 08:32:28 am »
Sounds like a Nixie tube.


Though not made for a good many years now, the tubes are still available. To buy some, simplest thing would be to search Ebay for "nixie tube". Several of the later versions made in the former Soviet Union are commonly found and not too expensive. You can also often find Nixie driver boards and parts of old test equipment like that counter board up there, which can be used as the basis for clock designs. And there is a load of information on the tubes and driver circuits out there, here is just one page with details on building a simple AC-driven clock.

:)

Offline Dimbulb

  • New Member!
  • *
  • Posts: 2
Re: Antique Digital Bulbs: Need Information
« Reply #2 on: January 30, 2008, 11:25:53 pm »
Danrufus,

While in the army during the early seventies I used a computer that utilized Nixie tubes in its' display. When running a system check of some sort all of the tubes would cycle through all possible illumination configurations. It was pretty impressive looking so I made a point of initiating the process to impress people whenever I had the chance. The "Field Artillery Digital Automatic Computer" (FADAC) was used for determining azimuth, elevation, and etceteras.

Good luck with your clock project!

DimBulb
Don't worry. I'm sure it will stop sparking after it warms up.