research
 Patents
 Books
 Literature
 Articles
 Timeline
 Auction Archive

about
 About this site
 Wanted to buy

bulb gallery

Incandescent:
C
carbon
WD
drawn tungsten
WC
coiled tungsten
WM
mini tungsten
WS
pressed tung.
FG
figural bulbs
XL
christmas
XS
christmas sets
T
tantalum

Discharge:
NE
neon lamps
AR
argon lamps
XE
xenon lamps
MA
mercury
MC
fluorescent
MS
special mercury

Hardware:
F
fuses
FX
fixtures
PF
plugs & fittings
SA
sockets
SW
switches

tube gallery

 X-ray
 Geissler
 Crookes
 Radio
 Box art

museum pics

 Dr. Hugh Hicks
 
Fort Myers, FL.
 S.Slabyhoudek

links

 Related links
 Submit a link

 

Author Topic: Mogul base socket  (Read 17258 times)

Offline Scott

  • Sr. Member
  • ***
  • Posts: 84
Mogul base socket
« on: October 18, 2000, 10:33:00 am »
Does anyone know where I can find a mogul base socket? Apparently,they've all disappeared,despite the fact they were fairly common in the '80's. I've looked everywhere I can so far,and haven't found one. Or,a edison to mogul adapter. They used to sell these at farm-supply places,but not now. I have a mogul base bulb I'd like to fire up once,and then use the socket as part of a display.

Offline Tim

  • Administrator
  • Hero Member
  • *****
  • Posts: 831
    • http://www.bulbcollector.com
Mogul base socket
« Reply #1 on: October 18, 2000, 12:13:00 pm »
Ditto that Scott,

I could use about 20 of them to display bulbs in but they have been impossible to find here around Michigan in the old hardware stores and junk shops. I refuse to pay the high prices that the lighting/electrical shops want for one so I guess I'll keep looking in the same places...........



------------------
-Tim
BulbCollector.com
DewCollector.com

Offline Travers Koerner

  • New Member!
  • *
  • Posts: 7
Mogul base socket
« Reply #2 on: June 11, 2003, 03:21:00 pm »
I have a couple of old Mogul Base floor lamps that I don't want.

If anyone is still looking for these bases, I'm sure I could remove them from the lamps.

I suppose that the proverbial "make me an offer" applies here.

------------------
Travers
Travers

Offline Travers Koerner

  • New Member!
  • *
  • Posts: 7
Mogul base socket
« Reply #3 on: June 11, 2003, 04:06:00 pm »
Let me rephrase that last posting.

I'm not a dealer of any kind. I'm not looking to make any $ off of these mogul bases - as long as they are going to collectors, not dealers.

So - If you are "in the business", expect to pay for them. Otherwise, they are yours for the asking.


My email is tckoerner@hotmail.com


------------------
Travers
Travers

Offline Mónico González

  • Hero Member
  • ****
  • Posts: 146
  • Philips HP-80w Mercury Lamp
    • Mis Bombillas, peque?o museo virtual de la l?mpara el?ctrica.
Mogul base socket
« Reply #4 on: June 11, 2003, 05:08:00 pm »
Here in Spain Mogul sockets are very common, especially those ceramic made, and not too hard-to-find those brass ones (now these latter are "not too well seen" by CEE rules, and they tend to dissappear. Regrettable!), but our Mogul bases are not E39's but E40 instead.
I'm wondering what about use of actual Mogul based bulbs on US if these bases are missing?
because all incandescent lamps exceeding 200 watts are fitted with Mogul or so called Goliath caps, and discharge lamps (mercury, sodium, metal halogen, etc) exceeding 150-200 watts are Mogul based too, at least in Europe. I guess in US does the same.

Best regards.
 http://mis-bombillas.webcindario.com

Offline Yoshi

  • Hero Member
  • ****
  • Posts: 103
Mogul base socket
« Reply #5 on: June 12, 2003, 02:13:00 am »
I guess you are referring to the type of mogul socket that can stand by itself? They are hard to find but I have seen a few on eBay, often accompanied by a tungar bulb. For example this one:






I have a mogul socket but it is not of the "stand-by-itself" type. It came with a used 1000w huge incandescent bulb:






I was also planning on going to hardware stores and search for a few "stand-by-itself" mogul sockets, they are excellent for displaying bulbs with mogul bases. Are these sockets still being produced?? I'd like to buy 10-15 as long as they aren't too expensive.

I guess the problem with mogul sockets is that they are no longer being made in the shape that can stand by itself, they are now being made so that they can be bolted to streetlighting lamps. The old shape was probably being used with huge, inefficient, 1000w-1500w incandescent bulbs such as the one I got with my socket.


-Yoshi

How do I add custom avatars? The feature doesn't seem to be working

Offline Tim

  • Administrator
  • Hero Member
  • *****
  • Posts: 831
    • http://www.bulbcollector.com
Mogul base socket
« Reply #6 on: June 12, 2003, 11:03:00 pm »
quote:
Originally posted by Yoshi:
I guess you are referring to the type of mogul socket that can stand by itself?


Ya, that's the type I'm looking for.  I could use a few of these if anyone has some to spare...


------------------
Tim
Kilokat's Antique Light Bulb Site
Mountain Dew Collectibles, Volume I

Offline Bigglez

  • Jr. Member
  • **
  • Posts: 10
    • http://www.stonard.com
Mogul base socket
« Reply #7 on: June 14, 2003, 12:31:00 am »
Greetings,

A.J. Franzman invited me to post here as he and I were hunting Mogul based sockets about six months ago for my collection.

I was able to buy what I needed on-line using a credit card here:
 http://www.grandbrass.com/catalog.cfm?category=Sockets&subcategory=Mogul%20Base%20Sockets

The store front is/was in Manhattan. I believe they crossed the bridge to Brooklyn last summer. They carry a nice range of stuff including many ceramic lamp sockets.

Comments Welcome!


------------------
--
Peter J. Stonard
Office phone/voicemail:  (408) 377 7496
Cell phone/voicemail:      (408) 489 2862
website:               http://www.stonard.com
email:" TARGET=_blank>www.stonard.com
email:                   pstonard@ix.netcom.com
--
Peter J. Stonard
Office phone/voicemail  (408) 377 7496
Cell phone/voicemail      (408) 489 2862
website               email" TARGET=_blank>www.stonard.com
email                   pstonard@ix.netcom.com

Offline Alan Franzman

  • Nixie Tube Addict
  • Hero Member
  • ****
  • Posts: 104
  • Email a.j.franzman [A T] verizon [D O T] net
    • Nixie Tube Cross-Reference
Mogul base socket
« Reply #8 on: June 14, 2003, 07:53:00 pm »
quote:
Originally posted by Bigglez:
I was able to buy what I needed on-line using a credit card here:
 http://www.grandbrass.com/catalog.cfm?category=Sockets&subcategory=Mogul%20Base%20Soc  kets

The store front is/was in Manhattan. I believe they crossed the bridge to Brooklyn last summer. They carry a nice range of stuff including many ceramic lamp sockets.



Note that although neither of those on the linked page will stand by itself, both have a threaded base which will fit onto standard threaded tubing (the bottom one either 1/4" or 3/8") used in lamps and available at most harware stores.  You can simply make your own base by drilling a stepped hole into a board and fastening the socket with a short length of the tubing and a nut.  I believe this is what Peter did, mounting several sockets onto a single long plank.

[This message has been edited by Alan Franzman (edited June 14, 2003).]
A.J.

Offline Bigglez

  • Jr. Member
  • **
  • Posts: 10
    • http://www.stonard.com
Mogul base socket
« Reply #9 on: June 16, 2003, 12:38:00 pm »
quote:
Originally posted by Alan Franzman:
 Note that although neither of those on the linked page will stand by itself, both have a threaded base which will fit onto standard threaded tubing (the bottom one either 1/4" or 3/8") used in lamps and available at most harware stores.  You can simply make your own base by drilling a stepped hole into a board and fastening the socket with a short length of the tubing and a nut.  I believe this is what Peter did, mounting several sockets onto a single long plank.

[This message has been edited by Alan Franzman (edited June 14, 2003).]



A.J.,

You are correct - a gas pipe thread option allows these sockets to be mounted easily and neatly. If required, wires to operate the bulb can pass through the pipe.

Also, for a quick solution (to hold bulbs upright and presentable) the sockets can be screwed to any lumber with a single dry wall screw and fender washer (one with a large OD and small ID), both of which can be found at a home improvement retailer. I put several sockets along a 2x4 battern. Let's see - perhaps I can insert a PIX of it? Here:  http://www.stonard.com/neonixie/videolab/Front_detail_right.jpg

Comments Welcome!


------------------
--
Peter J. Stonard
Office phone/voicemail:  (408) 377 7496
Cell phone/voicemail:      (408) 489 2862
website:               http://www.stonard.com
email:" TARGET=_blank>www.stonard.com
email:                   pstonard@ix.netcom.com
--
Peter J. Stonard
Office phone/voicemail  (408) 377 7496
Cell phone/voicemail      (408) 489 2862
website               email" TARGET=_blank>www.stonard.com
email                   pstonard@ix.netcom.com

Offline Tim

  • Administrator
  • Hero Member
  • *****
  • Posts: 831
    • http://www.bulbcollector.com
Mogul base socket
« Reply #10 on: June 16, 2003, 03:46:00 pm »
Hey Peter, long time no talk!  Welcome to the bulb forums!

Thanks for the mounting tips on the mogul sockets.  I've come across these on eBay in the past and remember seeing them cheaper than Grand Brass.  I still like the old fashioned cleat sockets.  When thinking about this more I've come to the conclusion that they may be not be stable when free standing and displaying a large bulb.  Hard mounting the sockets described here would be a safer method of display and something I?ll have to consider?


------------------
Tim
Kilokat's Antique Light Bulb Site
Mountain Dew Collectibles, Volume I

Offline Bigglez

  • Jr. Member
  • **
  • Posts: 10
    • http://www.stonard.com
Mogul base socket
« Reply #11 on: June 16, 2003, 08:16:00 pm »
Quote
Originally posted by tim:
Hey Peter, long time no talk!  Welcome to the bulb forums!

Thanks, this looks like fun! Your web presence has come along way since we first met. In fact, it has been a couple of years - we should catch up off line by email.

Might even make a trip to Michigan soon, my wife Judy and I went hunting for personal treasure (light bulbs, radio tubes and Television Cameras in my case) on the Highway 127 sale last August. We drove the route from Cincinnati down to Atlanta, where we air-shipped four pallets back to Silly-Con Valley!

The "World's Longest Garage Sale" was a blast, and we're told it may head north into your part of the world. Here's the official link: http://www.jamestowntn.org/worlds.htm

Does anyone else have suggestiond for flea markets, museums, or other ports of call (bulb collecting centric) in the upper mid-west?

Comments Welcome!




------------------
--
Peter J. Stonard
Office phone/voicemail:  (408) 377 7496
Cell phone/voicemail:      (408) 489 2862
website:               http://www.stonard.com
email:" TARGET=_blank>www.stonard.com
email:                   pstonard@ix.netcom.com
--
Peter J. Stonard
Office phone/voicemail  (408) 377 7496
Cell phone/voicemail      (408) 489 2862
website               email" TARGET=_blank>www.stonard.com
email                   pstonard@ix.netcom.com

Offline Hemingray

  • Hero Member
  • ****
  • Posts: 136
  • Lightbulb Junkie
Mogul base socket
« Reply #12 on: June 28, 2003, 11:40:00 pm »
If you're close to Arkansas, there's an antique store in Cave City that has a box of Mogul to Edison socket adapters for sale.

Offline Yoshi

  • Hero Member
  • ****
  • Posts: 103
Mogul base socket
« Reply #13 on: July 19, 2003, 02:20:00 am »
I recently found a very old hardware store that has a supply of 20 or so porcelain mogul sockets, for $6 each. They look a lot like this one, except that they don't have the "legs" (they can still stand by themselves):

http://sfe-emul.tripod.com/temp/tungar-bulb-with-mogul-socket.txt" alt="Tungar bulb on porcelain Mogul socket" width=139 height=311>


I bought 3 of these sockets, and they can hold all but the largest lightbulbs safely. If anyone is interested I can take pics of one. The store also had cool tiny self-standing sockets for c6 and c7 lightbulbs (made of plastic), and tiny porcelain sockets for, I think, c9 bulbs. I can also take pics of these if you're interested.

The store also had one edison-to-mogul adapter and I bought it too, but it was the only one left. That store was a gold mine!

If you are interested in a few sockets, email me at .
How do I add custom avatars? The feature doesn't seem to be working

Offline Ralph

  • Jr. Member
  • **
  • Posts: 11
Mogul base socket
« Reply #14 on: July 27, 2003, 11:49:00 pm »
I have removed mogul base sockets from
old streetlight fixtures and old high
bay lighting fixtures found in scrapyards.

Sometimes if you talk real nice,the
scrapyard staff might let you remove
the sockets at no charge.

Added bonus -- if the fixture wasn't
clobbered too badly when removed from its
installation, there might be a real
pretty bulb that is still intact.
Ralph