research
 Patents
 Books
 Literature
 Articles
 Timeline
 Auction Archive

about
 About this site
 Wanted to buy

bulb gallery

Incandescent:
C
carbon
WD
drawn tungsten
WC
coiled tungsten
WM
mini tungsten
WS
pressed tung.
FG
figural bulbs
XL
christmas
XS
christmas sets
T
tantalum

Discharge:
NE
neon lamps
AR
argon lamps
XE
xenon lamps
MA
mercury
MC
fluorescent
MS
special mercury

Hardware:
F
fuses
FX
fixtures
PF
plugs & fittings
SA
sockets
SW
switches

tube gallery

 X-ray
 Geissler
 Crookes
 Radio
 Box art

museum pics

 Dr. Hugh Hicks
 
Fort Myers, FL.
 S.Slabyhoudek

links

 Related links
 Submit a link

 

Author Topic: Large old switch  (Read 6368 times)

Offline Dylan

  • Jr. Member
  • **
  • Posts: 17
Large old switch
« on: February 07, 2001, 06:59:00 pm »
I need some information on a large knife switch. I do not have a picture, but I will try to describe it. There is one similar to it on Poppa Bill Bulbs' Photopoint link (see topic "Antique light bulbs and more"). Mine has three poles and two of them have the big fuse holders. Any information on when this was made or what it was used for? Any help would be great!

------------------
---Dylan Windom
-Dylan Windom

Offline Tim

  • Administrator
  • Hero Member
  • *****
  • Posts: 831
    • http://www.bulbcollector.com
Large old switch
« Reply #1 on: February 07, 2001, 10:23:00 pm »
Hey Dylan, welcome to the board.

Does your switch have any identifying marks on the bottom or anywhere else such as the maker's initials? I'm not a switch expert but this might provide everyone with some more clues as to who made it. Also what's the base material made from - porcelain?

------------------
-Tim
BulbCollector.com
DewCollector.com

Offline Dylan

  • Jr. Member
  • **
  • Posts: 17
Large old switch
« Reply #2 on: February 07, 2001, 11:05:00 pm »
The name on the wooden handle is "Trumbull". It also states that this switch is rated at 125V @ 60A. A label on one of the fuses is halfway gone but I can read some of it. The name on the fuse is -Shawmut Co. in Massachusetts (what was before the "-" is missing). The fuse looks original, and its shell is made of thick cardboard.
     I'm not really sure what the base is made from, but it looks like it's just a slab of dark-gray rock, and it's very heavy. I can't find any identification other than what is stated here.

------------------
---Dylan Windom
-Dylan Windom

Offline Scott

  • Sr. Member
  • ***
  • Posts: 84
Large old switch
« Reply #3 on: February 12, 2001, 07:50:00 pm »
My best guess is that it's an old industrial switch used to control big motors. I've not seen one that big,but I have old books that show switches similar to the one you describe in industrial motor-control use.Just a guess, though.