BulbCollector Forums
BULB BANTER => General Discussion => Topic started by: sailormoon_01_uk on November 21, 2009, 04:58:22 am
-
Hi All
I wonder if anyone has any Technical Information on this Lamp see Photo attached
On the Bulb it has Osram 40w MBM/U, it has a P28s or Medium Prefocus Cap it looks similar to this B.T.H. Mazda 40w MBM/U Mining Lamp on Lamptech's website see http://www.lamptech.co.uk/Spec%20Sheets/Mazda%20MBM40.htm , except it has a 3 pin BC or B22d-3 cap.
Also does anyone know a compatible Ballast to test the lamp
All the Best
Colin
http://www.freewebs.com/thecolingrimescollection/
and
http://the-lighting-museum.yolasite.com/
-
I like to thank James Hooker for information on the Osram GEC MBM/U mercury Lamp, the Lamp was used in the lighting of Mines and was specially designe for approval for the Mining Industry
The Lamp Letter Code is as Follows
M = Mercury Vapour
B = Quarz Arc Tube (High Pressure)
M = Mining Applications
/U = Universal (Any) Operating Position
He also advised me on a reccomended ballast which unfortunately has failed but I got it working on a European 35w HPS/MH Ballast the results are as follows
Supply voltage 250 volts
Ballast Type = PARMAR 35w HPS/MH Reactor Ballast (Choke Type)
Lamp Voltage = 100 volts
Lamp current = 0.56 amps
He advised me I may require to give the Lamp a High Voltage kick by using a 35/50/70w HPS Ignitor or a Tesla Coil (I don't Have), howeber the lamp struck without any starting aid.
Photos attached
All the Best
Colin
http://www.freewebs.com/thecolingrimescollection/
and
http://the-lighting-museum.yolasite.com/