research
 Patents
 Books
 Literature
 Articles
 Timeline
 Auction Archive

about
 About this site
 Wanted to buy

bulb gallery

Incandescent:
C
carbon
WD
drawn tungsten
WC
coiled tungsten
WM
mini tungsten
WS
pressed tung.
FG
figural bulbs
XL
christmas
XS
christmas sets
T
tantalum

Discharge:
NE
neon lamps
AR
argon lamps
XE
xenon lamps
MA
mercury
MC
fluorescent
MS
special mercury

Hardware:
F
fuses
FX
fixtures
PF
plugs & fittings
SA
sockets
SW
switches

tube gallery

 X-ray
 Geissler
 Crookes
 Radio
 Box art

museum pics

 Dr. Hugh Hicks
 
Fort Myers, FL.
 S.Slabyhoudek

links

 Related links
 Submit a link

 

Author Topic: Royal "Ediswan" lamp markings?  (Read 10852 times)

Offline Tim

  • Administrator
  • Hero Member
  • *****
  • Posts: 831
    • http://www.bulbcollector.com
Royal "Ediswan" lamp markings?
« on: October 03, 2005, 09:32:08 pm »
Here are photos of two interesting English lamps that I’m hoping someone can provide more information about.  Both lamps have miniature double contact bayonet bases and operate on 24 volts.  The glass is colored cobalt blue.  One lamp has a carbon filament, while the other has a tungsten filament.  Both are marked Royal “Ediswan”, so I presume both are from the early to mid 1920s.  One marking on the base has me baffled: “A.P. 666.” Another one that I have is marked “A.P. 666. BM”  The carbon lamp also has the number “543” printed on the base.  Can anyone interpret these numbers or tell me if they have any similar lamps in their collection?

Offline James

  • Hero Member
  • ****
  • Posts: 169
    • www.lamptech.co.uk
Re: Royal "Ediswan" lamp markings?
« Reply #1 on: October 07, 2005, 06:37:08 pm »
Hi Tim,

The reference AP on a British lamp stands for Admiralty Pattern, and indicates that the lamp is of a type developed for that division of the military.  You will frequently also find lamps whose codes begin AM or 5L (for the Air Ministry / Air Force), EL (Home Office), WO (War Office / Foreign Office), and X (Post Office Telecommunications, now British Telecom). 

Today the codes for Government Service lamps in all NATO countries have been standardised, to reduce stocking requirements and enable compatibility between the military organisations in these countries.  These new references always take the form 6240-99-995-XXXX for lamps 50V and below, the 995 being replaced with 996 for types above 50V.  On miniature lamps where there is not room to stamp the entire code, the prefix 6240-99 may be omitted.  The new reference for your lamp is 6240-99-995-2228, it is still listed as a current type for active service although I would be surprised if it had been made for a couple of decades.

Anyway back to your specific request!  AP666BM is a 24-Volt 4-Watt indicator lamp, most frequently employed in gunsights.  B15d base, T-11 glass, 30.5mm length and 1000 hours design life.  The carbon filament type is a later development which had better shock resistance properties than the original tungsten version.  They were made by GEC and Ediswan (in that brand name) right up to the late 1960s.  I would guess your tugsten version is quite old though, and the use of the Admiralty stock number instead of the more modern NATO Inter-Service number suggests a production date before 1955.

There is also a similar AP666M which has a bulb made in clear glass.  The blue version was used for night sighting.  GEC made a number of red glass versions for other indicator applications.  You can find a complete catalogue of current Government Service lamps in Defence Standard 62-6, available free of charge from the Ministry of Defence in UK.  I presume that the US authorities must produce a similar document but I never had any success in tracking down who is responsible for its publication.  The British version certainly makes interesting reading though, and is an invaluable reference for finding specs on lamps bearing these codes.

Best regards,

James

Offline Tim

  • Administrator
  • Hero Member
  • *****
  • Posts: 831
    • http://www.bulbcollector.com
Re: Royal "Ediswan" lamp markings?
« Reply #2 on: October 08, 2005, 09:48:40 pm »
Hi James,

Thank you very much for the detailed explanation.? I really appreciate the response regarding the numbering system and your knowledge never ceases to amaze me on matters like this!

These lamps were pulled from an atmospheric theater built during the late 1920s that resides in New Zealand.? From what I’ve been able to gather, the theater has a dome shaped ceiling and had a number of these lamps installed in such a manner that it simulated a night sky (these lamps representing the stars when lit).? It must have been an impressive display.? The theater was recently restored and has since been retrofitted with a fiber optic lighting system that takes the place of these “star lamps”.

Offline Tim

  • Administrator
  • Hero Member
  • *****
  • Posts: 831
    • http://www.bulbcollector.com
Re: Royal "Ediswan" lamp markings?
« Reply #3 on: November 10, 2005, 06:49:50 pm »
For those interested, here's a picture of the Civic Auditorium in Auckland, New Zealand from which these lamps originated.  I would like to thank forum reader Peter Stoneham for permission to use this photo.